| System |
Description |
| Industriever 800
Vertical Lift
|
 | Most economical for small parts storage |
| Maximum cube utilization for many media heights |
| Provides moderate to high throughput |
| Six standard pan sizes (24w x 18d or 24d, and 36w
x18d, 24d, 26d,or 30d |
| Two-module minimum recommended |
| Sold in one-foot increments from 12'-9.5" to
30'-9.5" |
| Allows easy visibility and accessibility without
removing tote from storage pan |
| Easily interfaces with any type of take-away device
including robotics, AGV, conveyers, hoists, etc. |
| Each module accommodates up to 4 access windows that
work independently |
| Optional Material Control Software |
|
| Industriever 8000T
(Turbo) Vertical Lift
|
| Delivers higher throughput than 8000 |
| Increased module payload over 8000 |
| Two standard pan sizes 36w x 24d or 30d |
| May be purchases as stand-alone module |
| Sold in one-foot increments from 10' to 31' |
| Allows easy visibility and accessibility without
removing tote from storage pan |
| Easily interfaces with any type of take-away device
including robotics, AGV, conveyers, hoists, etc. |
| Each module accommodates up to 4 access windows that
work independently |
| Optional Material Control Software |
|
| Industriever 12000
(Turbo) Vertical Lift
|
| Comparable to 8000 in travel speed (65' per minute) |
| Increased pan and module payload over 8000T |
| Two standard pan sizes 36w x 24d or 30d |
| Two-module minimum recommended |
| Sold in one-foot increments from 10' to 31' |
| Allows easy visibility and accessibility without
removing tote from storage pan |
| Easily interfaces with any type of take-away device
including robotics, AGV, conveyers, hoists, etc. |
| Each module accommodates up to 4 access windows that
work independently |
| Optional Material Control Software |
|
| Industriever 12000T
(Turbo) Vertical Lift
|
| Faster vertical speed than 12000 |
| Same pan and module payload as 12000 |
| Six standard pan sizes (36w x 26d, 30d or 32d, and
48w 26d, 30d or 32d) |
| May be purchases as stand-alone module |
| Sold in one-foot increments from 10' to 31' |
| Allows easy visibility and accessibility without
removing tote from storage pan |
| Easily interfaces with any type of take-away device
including robotics, AGV, conveyers, hoists, etc. |
| Each module accommodates up to 4 access windows that
work independently |
| Optional Material Control Software |
|
| Industriever 16000
Vertical Lift
|
| Comparable to 12000 in vertical speed |
| Substantially heavier payload per pan and slightly
higher payload per module that 12000 and 12000T |
| Six standard pan sizes (36w x 26d, 30d or 32d, and
48w 26d, 30d or 32d) |
| May be purchases as stand-alone module |
| Sold in one-foot increments from 10' to 31' |
| Allows easy visibility and accessibility without
removing tote from storage pan |
| Easily interfaces with any type of take-away device
including robotics, AGV, conveyers, hoists, etc. |
| Each module accommodates up to 4 access windows that
work independently |
| Optional Material Control Software |
|
| Industriever Titan Vertical
Lift
|
| 1/8" clearance between media and adjacent pan
delivers highest cube storage capacity on any vertical storage system
on the market |
| 150 ft per minute travel speed delivers highest
throughput of any Kardex vertical storage system |
| Larger tray sizes (36" x 32", 48" x
32" 75" x 32" and 100" x 32") |
| Taller standard units (up to 41') |
| PLC Control System with self diagnostics and optional
interface connector |
| May be purchases as stand-alone module' |
| Allows easy visibility and accessibility without
removing tote from storage pan |
| Easily interfaces with any type of take-away device
including robotics, AGV, conveyers, hoists, etc. |
| Each module accommodates up to 4 access windows that
work independently |
| Optional Material Control Software |
|
| Industriever 3500 Vertical
|
| Excellent payback for shorter ceiling heights |
| Maximizes cube utilization for common media heights |
| Allows visual load scanning of carrier contents |
| Easily accommodates pick-face or bin-front picking |
| Accommodates 18" deep product |
| Available with up to four access windows per unit |
| Carrier styles: single-tier, double-tier,
triple-tier, single-tier divider less with optional drop-in tier
inserts |
| Optional Material Control Software |
|
| Industriever 6000 Vertical
|
| Excellent payback for shorter ceiling heights |
| Heavier payload then 3500 (600lbs vs. 350lbs) |
| Allows visual load scanning of carrier contents |
| Easily accommodates pick-face or bin-front picking |
| Maximizes cube utilization for common media heights |
| Accommodates 18" deep product |
| Available with up to four access windows per unit |
| Carrier styles: single-tier, double-tier,
triple-tier, single-tier divider less with optional drop-in tier
inserts |
| Optional Material Control Software |
|
| Industriever 6250 Vertical
|
| Excellent payback for shorter ceiling heights |
| Same payload as 6000 (600lbs per carrier, 16,500lbs
per module) |
| Taller pitch than 3500 or 6000 (16.5") |
| Allows visual load scanning of carrier contents |
| Easily accommodates pick-face or bin-front picking |
| Maximizes cube utilization for common media heights |
| Accommodates 25" deep product |
| Available with up to four access windows per unit |
| Carrier styles: single-tier, double-tier,
triple-tier, single-tier divider less with optional drop-in tier
inserts |
| Optional Material Control Software |
|
| Movable Rack
|
| For storage of pallets and large bulk items |
| Movable aisle shelving with fork truck access |
| Creates access aisles only when and where necessary |
| Allows operation from end-panel controls or optional
remote control |
| Provides more than double the storage capacity of
fixed rack |
| Accepts any type of new or existing standard rack |
| Optional Material Control Software |
|
 |
MCS2 for
Windows
Automatically maintains up-to-date inventory
records. Simplifies kitting and working order processing for faster
turnaround. Automatically assigns parts to the most space and time
efficient locations. Allows easy implementation of JIT inventory
levels and FIFO stocking procedures. Creates a complete audit trail
of part and operator activity. Allows downloading and uploading capabilities
of ASCII format files to Mainframe or host IMS System.
Q-Manager for Windows
Links you existing IMS system to Kardex automated storage/retrieval
systems. Imports picking and stocking orders directly from your
main-frame Inventory Management System, Interfaces and drives all
types of Kardex automated systems up to 99 units. Activates Kardex
Retrieval systems to deliver requested material in location sequence for
fastest possible retrieval.
K-Trieve Plus for Windows
Basic parts tracking program designed to improve
accuracy and inventory flow. Reduces search and retrieval time by
tracking the location of all material stored in Kardex automated storage
and retrieval systems up to 99 units. Automatically updates
inventory records after each picking or stocking operation.
Activates Kardex Retrieval systems to deliver requested material in
location sequence for fastest possible retrieval. Improves accuracy
with automated bar code data processing.
Customer-Designed Software
Special license to use driver codes for Kardex automated
storage/retrieval systems. Allows Kardex users to design custom
software for specialized applications. Driver codes available for
Industriever Vertical Lift, Industriever Vertical Carousel, Titans, and
Kardex Movable Rack System |
